CoffeeTEAM Therm
Page 3
For brew it now you can do one of two things, leave the settings of the clock and use the program button to simply start brewing or change the settings. The settings for brew it now uses the same settings that are currently in the clock and program as far as the strength and amount.
The amount is set by how much water you put in the water container when you set up for brewing and not the entered amount for the program. I’m not sure exactly what the program amount is for but water will run through the machine for how much you put in the water container just like any other coffee maker, but this is definitely not just any other coffee maker. You can also alter the strength and the taste by how fine the grind is using the bean container strength adjustment by turning the bean container.
To brew it now you just push the power button after filling the water, setting the filter to the grind position and of course filling the beans. The CoffeeTEAM Therm will brew using the programmed settings and if you want to change them just follow the programming steps in the manual and then hit the power button.
The coffee will brew and drip into the stainless steel carafe and if you just can’t wait for that first cup till the machine is done the stopper at the bottom of the basket will not spill coffee all over. The carafe will keep your coffee warm for several hours but not all day and has a nice closing spout by turning the lid to keep the fresh coffee warmer longer.
You can also brew coffee without using the grinder, I won’t go into why you would want to, by simply not putting the filter basket to the grinder position and filling it with ground coffee. You push the power button and of course with water in it will start brewing coffee immediately without going through the grind process. With the filter basket not latching the machine knows not to use the grinder so you skip that part of the grind and brew process.